Robotics B.Tech & M.Tech Beginner

Arduino Alvik remote control

A tilt-based Bluetooth Low Energy remote for the Arduino Alvik, using an Arduino Nano RP2040 Connect's built-in IMU instead of buttons or a joystick.

Suitable forB.Tech & M.Tech Robotics students
Build time1-2 weeks
LevelBeginner
Available atAjvika Labs, Kakinada

Get this project Enquire online Call

About this project

A motion-based BLE remote controller for the Arduino Alvik, programmed in MicroPython. Instead of buttons or a joystick, it reads the built-in IMU on an Arduino Nano RP2040 Connect: tilting the controller forward drives the Alvik forward, tilting right turns it right, and so on, with a buzzer melody confirming button presses on the controller.

Source: Arduino Project Hub (https://projecthub.arduino.cc/c_sarnataro_arduino/arduino-alvik-remote-control-fd51ba) by c_sarnataro_arduino. Licensed GPL3+. On Arduino Project Hub: 15,646 views, 2 respects.

Technologies used

Arduino AlvikBluetooth LEMicroPython

Hardware components

Arduino Alvik
Arduino USB Type-C Cable 2-in-1
Arduino USB 2.0 Cable Type A/Micro 1M
Arduino Nano RP2040 Connect with headers
Breadboard 100x70
Generic push button
USB power bank (generic)

Software & tools

Arduino Lab for MicroPython
Arduino MicroPython Installer

What you get

Working project / hardware kit, tested before delivery
Complete source code with explanation
Project demo and guidance for your viva
Project report, PPT and IEEE paper support (on request)

Delivery & Payment

Delivery takes a minimum of two weeks from the date your inquiry is confirmed. Payment is in two parts: • 50% advance to start the project • Remaining 50% before delivery Note: • Documentation and PPT are not included by default • If you need documentation/PPT, it can be arranged for extra time and cost We'll confirm the exact timeline and cost with you after reviewing your requirements.