How to Make an RFID Door Lock System using Arduino?

Are you tired of searching for keys whenever you need to open a door? How about building a smart locking system where you can simply swipe a card to open the door? In this article, we will learn how to build an RFID door lock system using Arduino. It’s a fun and secure way to unlock the door.

└ How do Arduino based RFID Door Lock Work?

RFID Door Lock System using Arduino Circuit Diagram

└ Connection Between Arduino and RFID Reader

└ Connection Between Arduino and I2C LCD Display

└ Connection Between Arduino and Relay Module

Arduino Code to Read RFID Card UID

Upload the UID Scan Code

Code for RFID Door Lock System using Arduino

Upload the code of the RFID Door Locking System

Final Testing of our RFID Door Lock System

Projects Using RFID for Security and Automation

Radio Frequency Identification is widely used in contactless payment cards, National Highway Tollgate systems, and in security passes. By integrating an RFID reader with an Arduino, you will be able to create a system that automatically opens the door when an authorized RFID card or tag is scanned. This project is perfect for anyone who wants to make their home or office a little smarter. You can also check out our other Arduino Projects and Home Automation Projects if you want to explore more DIY Arduino projects.

This Arduino RFID Door lock system consists of an Arduino Development Board ( Arduino UNO, Arduino Nano or other), an RFID reader module and an actuator, such as a servo motor or solenoid lock, to lock and unlock the door. All we need to do is swipe or place an authorised RFID card in front of the RFID reader. Here, Arduino handles data processing activities to decide whether the RFID card is valid or not. If the card gets recognised, the Arduino sends a signal to the relay to unlock the solenoid door lock for 10 seconds. Later, it locks the door automatically.

To make it more user-friendly, I decided to use a 16x2 I2C-based LCD display to show door status and to provide important feedback messages to the door opener, like Access Granted or Access Denied.

To build an RFID Door lock system, we will need a few essential components. Here is a simple list of what you will need to start.

Arduino UNO R3 Development Board

Arduino UNO R3 Development Board

Single Channel Relay Module

Single Channel Relay Module

16x2 LCD Display along with I2C Expansion Module

16x2 LCD Display along with I2C Expansion Module

Power Supply Adaptor

Power Supply Adaptor

In the next section, we will see the circuit diagram for the Arduino-based RFID Door Lock System. Build smarter with electronic projects that include clear explanations and working designs.

RFID Door Lock System using Arduino Circuit Diagram

The below RFID Door Lock System circuit diagram represents how an Arduino, RFID Module, Relay module, Solenoid Lock, and LCD display are connected to create a secure and automated door lock system.

This setup makes our Door to unlock only when an authorized RFID tag or RFID card is scanned. Below you can find our actual hardware setup of the Arduino RFID Door Lock System developed by using Circuit Diagram and Pin Connection Details as a reference. We have built a lot of RFID based projects previously, if you are completely new to RFID and would like to understand the basics of RFID and how it works with Arduino, you can read our Arduino RFID tutorial before proceeding with this project.

As you can see, the hardware connections are pretty easy. We have the Arduino UNO board, which acts as the main brain of this project. The RC522 RFID reader module is used to read the RFID cards, and the 16x2 LCD is used to display the status information. The 12V solenoid lock is connected through a relay module to our Arduino UNO board. The setup is powered by a 12V lithium battery pack, making the project portable and easy to install. You can also usea 12V adapter with Arduino UNO if you do not have a battery.

To make the hardware connection easy to understadn we have given a table below which explains the connection between your Arduino board and the RFID, LCD and Relay modules.

RC522 RFID Reader Pin

Single Relay Module Pin

Now that the hardware is ready lets move on to the programming section of our rfid door locking system. But before we do that its important to understand that the Arduino code for this project is split into two sections. This is because each RFID card or Tag will have a unique ID number, and it is important to know this unique ID of your RFID card to be able to grant access to it. So in the first section of code, we will place your RFID card on a reader and read this unique ID, and in the second section of code, we will use this unique ID to build our RFID door locking system.

Arduino Code to Read RFID Card UID

To know your Authorised RFID card UID, just compile and dump the code in Arduino. Note, for this, you can keep your hardware setup as it is without any modifications.

Header files download links: MFRC522.h LiquidCrystal_I2C.h

After downloading, you can install it through the Arduino IDE, by going to Sketch -> Include Library -> Add ZIP Library and selecting the downloaded .ZIP file.

Upload the UID Scan Code

After dumping the code into Arduino, it will ask you to scan the RFID Card.

After scanning, you can able to see the scanned RFID card UID details in the serial monitor at the baud rate of 9600, as shown in the image.

At the same time, you can also able to see the UID on the display as well.

Note down the RFID card UID, which later gets used in the code of the RFID Door lock system.

Code for RFID Door Lock System using Arduino

This code is for an RFID door lock system using an Arduino. It reads the UID of the RFID card and compares it to a predefined authorized UID. If the RFID card UID matches the predefined UID details, then it unlocks the door for 10 seconds with the help of a relay and solenoid door lock; meanwhile, it displays the door status on the LCD display.

MFRC522.h - it is used for interfacing with the RC522 RFID reader module.

MFRC522.h - it is used for interfacing with the RC522 RFID reader module.

LiquidCrystal_I2C.h - used for controlling the I2C-based LCD display.

LiquidCrystal_I2C.h - used for controlling the I2C-based LCD display.

You can easily get this library by clicking the appropriate header file name.

After downloading the ZIP file from the GitHub repo, you can install it either through the Arduino IDE, by going to Sketch -> Include Library -> Add ZIP Library and selecting the downloaded .ZIP file, or by just simply extracting the Zip file into the Arduino library folder.

Here, I am defining the macros of the Reset pin and Slave Select pin for the RFID module and Relay signal pin for the relay module.

In the above code, I am creating the objects for the RC522 RFID and the I2C LCD module for proper initialization purposes.

byte authorizedUID[] = {0x69, 0xA9, 0x81, 0x5A};

This array holds the unique UID of the authorized RFID card. Replace these values with your authorized RFID tag’s UID.

Here, the doorLocked variable is used as the status flag to know whether the door is locked or open.

This setup() function is essential for setting up the hardware configurations. In this setup, I use the SPI.begin() function to initialise the SPI communication for the RFID reader module. Then I make a call rfid. PCD_Init() function to configure the RFID reader.

Later, I used the LCD predefined function to initialise the I2C lcd module. Finally, I make a call on the lockDoor() function to make sure the door is locked initially.

This loop() function keeps on checking for new cards using rfid. PICC_IsNewCardPresent() and read its UID using rfid. PICC_ReadCardSerial() function. After reading the UID card, it compares that UID with the predefined authorized UID using the isAuthorized() function.

If the UID matches, it prints Access Granted on the LCD display and makes a call to UnlockDoor() to unlock the door; otherwise, it prints Access Denied on the LCD display and makes a call to the lockDoor() to lock the door.

Finally, it makes a call on rfid. PICC_HaltA() to halt communication with the currently scanned RFID card.

The above isAuthorized() is used to check whether the scanned RFID card UID matches the predefined authorized UID value. If it matches the UID, it returns true; else it returns false.

This lockDoor() function is used to lock the solenoid door lock by providing a low signal to the relay module. After that, it prints “Door Locked” on the LCD display.

This unlocksDoor() function is used to unlock the solenoid door lock by providing a high signal to the relay module for 5 seconds, after that, it again locks the door by calling lockDoor() function. It also prints door status like “Door Unlocked” on the lcd display.

Upload the code of the RFID Door Locking System

Before uploading the code, make sure the board is selected properly; in our case, it is Arduino Uno.

After selecting the board, select the USB port of our Arduino UNO board. Through that USB port, only the program file gets flashed into Arduino UNO.

Then, finally, click the upload button to dump the RFID Door lock system code into an Arduino.

Final Testing of our RFID Door Lock System

At last, we've entered the most exciting phase, i.e final testing of our RFID Door Lock System using Arduino! For every electronics hobbyist, the most priceless moment is seeing their project work as expected. This phase ensures that our system reliably authenticates RFID tags to open the Door. It’s time to witness our hard work.

You can see that, after scanning the Authorised RFID Tag, it granted access and unlocked the Solenoid Door to get Unlocked.

With this, we have come to a conclusion of our RFID door lock system using the Arduino project. Hope you have learned something useful and have enjoyed building the project on your own. If you have any questions or need help, you can reach us through the comment section below or through our forum.

Build smarter with power electronics projects that include clear explanations and working designs.

Projects Using RFID for Security and Automation

RFID technology is widely used in security and automation projects for access control, authentication, and tracking systems. We have previously used RFID in various projects. If you want to explore more on these topics, check out the links below.

Arduino Solenoid Door Lock using RFID

This project involves creating an RFID-based door lock system using an Arduino. It provides detailed instructions on setting up the hardware and software components to control access via RFID tags.

Digital Keypad Security Door Lock using Arduino

This project demonstrates how to build a password-protected door lock system using a digital keypad and Arduino. It provides a step-by-step guide to setting up the hardware and programming the Arduino to control a servo motor for locking and unlocking.

Fingerprint-based Car Ignition System using Arduino and RFID

Demonstrates a Fingerprint-Based Car Ignition System using Arduino and RFID, ensuring only authorised users can start the vehicle. Learn how to integrate a fingerprint sensor and an RFID module with Arduino to create a secure ignition system.